Products

OVS-TG

Spindle Sander

Easy Spindle Interchange

Features

370x370mm Cast iron table, rib reinforced for maximum stability. The table surface is precision ground.
Heavy guage steel frame.
Rubber drum can be fitted on both ends for full use of the entire spindle.
The high spindle speed of 1720RPM combined with the oscillating fine finishing effects.
Easily interchangedable spindle.
Tilting table for bevelled parts sanding.

Description

EASY SPINDLE INTERCHANGE

This machine accepts spindle diameters of 5/8", 1-1/2" and 2" for fitting with various diameters of rubber drum.
Spindle change is easily made using the wrench supplied.

TILTING TABLE

The table may be tilted front downwards up to a maximum of 45 degrees to allow the sanding of bevelled parts.
A graduated scale is attached for accurate reading of the degree of tilt.

DUST HOOD

A plastic dust hood is supplied under the table for connection to a dust collector.
The dust hood outlet diameter is 2".

Specifications

Oscillations per minute 29
Oscillations stroke 15/16" (24 mm)
Sanding spindle diameter (Sandard) 1/4", 1/2", 5/8", 1-1/2", 2"
Sanding spindle diameter (Optional) 3"
Spindle speed 1720 rpm
Table area 370 x 370 mm
Table tilt 45 degrees front, downward
Table height from floor 465 mm
Motor 1/2 HP
Dust collect for 2"to 4"(optional)

Size

Dust hood outlet diameter 2"
Net weight 30.3 kgs
Gross weight 37.7 kgs
Machine dimensions (LxWxH) 370 x 370 x 480
Packing dimensions (LxWxH) 435 x 435 x 525